AgroFarma Substation

CHA provided full-service design, protection coordination, relay settings and SCADA system design for two substations for New York State Electric & Gas (NYSEG) as part of the AgroFarma Substation upgrade project. Work included addition of a 46kV circuit breaker and protection panel at the existing 115kV – 46kV County Line Substation and a new 46kV – 12kV Columbus distribution substation. The Columbus substation included three 46kV circuit breakers, two 46kV – 12kV transformer banks and a 12kV switchgear/control house with four 12kV exit feeders. The work under this project was done under design-build contract with the contractor, D&D Power.

Project Services
  • Design
  • Protection Coordination
  • Relay Settings
  • SCADA System Design